H3C Technologies H3C S6800 Series Switches - Manual

About the S6800 configuration guides
The S6800 configuration guides describe the software features for the S6800 Series Switches, and guide
you through the software configuration procedures. These configuration guides also provide
configuration examples to help you apply the software features to different network scenarios.
Configuration guide Content
Fundamentals Configuration Guide
Describes how to use the command line interface of the switch, log in to
and set up the switch, and use the basic management functions. This
guide includes:
• Using the CLI
• Login overview
• Logging in through the console port for the first device access
• Logging in to the CLI
• Logging in to the Web interface
• Accessing the device through SNMP
• Controlling user access
• Configuring RBAC
• Configuring FTP
• Configuring TFTP
• Managing the file system
• Managing configuration files
• Upgrading software
• Device management
• Using Automatic configuration
Layer 2—LAN Switching
Configuration Guide
Covers Layer 2 technologies and features used on a LAN switched
network, such as VLAN technology, Spanning Tree. You can use these
features to divide broadcast domains and remove Layer 2 loops. This
guide includes:
• Configuring Ethernet interfaces
• Configuring loopback, null, and inloopback interfaces
• Bulk configuring interfaces
• Configuring the MAC address table
• Configuring MAC Information
• Configuring Ethernet link aggregation
• Configuring spanning tree protocols
• Configuring loop detection
• Configuring VLANs
• Configuring LLDP
• Configuring service loopback groups
• Configuring cut-through forwarding