H3C Technologies H3C S5830 Series Switches - Manual (Page 32)

Figure 33 Removing the power module (S5830-106S)
(1) Pivot the latch up with your thumb (2) Pull the power module out
Connecting the power cord
Connecting the AC power cord
1. Insert the female connector of the AC power cord supplied with the power module into the
AC-input power receptacle of the power module.
2. Use a cable tie to secure the power cord to the handle of the power module, as shown in Figure
34 .
3. Connect the other end of the power cord to an AC power outlet.
Figure 34 Connecting the AC power cord
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power module
Connecting the DC power cord
1. Unpack the DC power cord, identify the plug for connecting to the power module, orient the plug
with the power receptacle on the power module, and insert the plug into the receptacle (see Figure
26