H3C Technologies H3C S5560 Series Switches - Manual (Page 10)

5
Installing and removing a power module
NOTE:
Before installation, make sure the power module model is as
required. For more information, see the installation guide of the
device.
Installing the power module
To avoid bodily injury or device damage, follow the steps in Figure 2 to
install the power module.
Figure 2 Installation procedure
1. Put on the ESD-preventive wrist strap, and make sure the strap
makes good skin contact and is well grounded.
2. Unpack the power module and verify that the power module
model is as required.