H3C Technologies H3C MSR 50 - Manual (Page 16)

9
Task Command Remark
Ping an IPX network to check
connectivity. ping ipx network.node [ -c count |
-s size | -t timeout ] *
Available in any view.
Displaying and maintaining IPX configuration
Task Command Remark
Display IPX interface
information.
display ipx interface [ interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display IPX packets
statistics. display ipx statistics [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display the active IPX
routing information. display ipx routing-table [ network ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display detailed IPX
routing information (both
active and inactive).
display ipx routing-table [ network ] verbose [ |
{ begin | exclude | include } regular-expression ]
Available in any view.
Display IPX routing
information for the
specified route type. display ipx routing-table protocol { default | direct
| rip | static } [ inactive | verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display IPX routing
statistics. display ipx routing-table statistics [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display the IPX service
information table.
display ipx service-table [ inactive | name name |
network network | order { network | type } | type
service-type ] [ verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Clear IPX statistics. reset ipx statistics Available in user view.
Clear IPX routing
information. reset ipx routing-table statistics protocol { all |
default | direct | rip | static }
Available in user view.
IPX configuration example
Network requirements
• Router A and Router B are connected through an IPX network. The IPX address of Ethernet 1/1 on
Router A is 1000.00e0-fc01-0000 and that on Router B is 1001.00e0-fc01-0001.
• The server is installed with NetWare 4.1 and its IPX address is 2.0000-0c91-f61f, packet
encapsulation format is Ethernet_II. The client is a PC. Its network ID is 3, and packet encapsulation
format is SNAP.
• The server provides file and printing services. The client can access these services through the IPX
network.