H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 58)

50
Figure 45 Reestablish the connection
3. Press Enter in the terminal window.
The terminal displays the current baud rate setting:
The current baudrate is 115200 bps
The current baudrate is 115200 bps
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default) |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200* |
|<0> Exit |
============================================================================
Enter your choice(0-5):
NOTE:
After downloading files with a changed baud rate, timely change the baud rate back to 9,600 bps in
HyperTerminal to ensure the normal display on the terminal screen when the system boots or reboots.
Upgrading a system software image file through a serial
connection
Enter the BootWare main menu (see “ BootWare main menu ”). Select 2 from the BootWare main menu
to enter the BootWare serial submenu. For more information, see “ Serial submenu .”
Take upgrading the main system software image file as an example.
To accelerate the file upgrade, you can modify the serial port baud rate. For how to modify the baud rate,
see “
Modifying serial communication parameters .”
1. Select 2 on the BootWare operation submenu.
The system prompts the following information:
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCCCCCCC