H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 70)

61
Step Command Remarks
4. Configure the channel
through which system
information can be output to a
monitor terminal.
info-center monitor channel
{ channel-number |
channel-name }
Optional.
By default, system information is
output to the monitor terminal
through channel 1 (known as
monitor).
5. Configure a system
information output rule for a
monitor terminal.
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional.
See "
Default output rules of system
information ."
6. Configure the timestamp
format.
info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional.
By default, the timestamp format
for log, trap and debugging
information is date.
7. Return to user view. quit N/A
8. Enable system information
output to the monitor terminal. terminal monitor
Enabled on the console and
disabled on the monitor terminal
by default.
9. Enable the display of system
information on a monitor
terminal.
• Enable the display of
debugging information on a
monitor terminal:
terminal debugging
• Enable the display of log
information on a monitor
terminal:
terminal logging
• Enable the display of trap
information on a monitor
terminal:
terminal trapping
Optional.
By default, the monitor terminal
displays log and trap information,
and discards debug information.
Outputting system information to a log host
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable the information center. info-center enable
Optional.
Enabled by default.
3. Name the channel with a
specified channel number.
info-center channel
channel-number name
channel-name
Optional.
See
Table 3 for default channel
names.