H3C Technologies H3C SecBlade LB Cards User Manual
Page 127
Advertising
117
Figure 82 Configuring the local clock as the reference clock
3.
Configure Device B:
Configure Device A as the NTP server of Device B.
a.
Select System > System Time from the navigation tree.
b.
Click Network Time Protocol.
The page for setting up NTP appears.
c.
Enter 1.0.1.11 in the NTP Server 1 box.
d.
Click Apply.
Figure 83 Configuring Device A as the NTP server of Device B
4.
Verify the configuration:
Advertising
This manual is related to the following products: