H3C Technologies H3C Intelligent Management Center User Manual
Page 19
12
Figure 1 Selecting Locale
4.
Select the country/region, language, and installation type.
IMC supports typical and custom installations.
{
Typical—Install and deploy all platform components on the current server. Before performing
the typical installation, you must first configure the installation parameters, such as database
connectivity, installation location, and Web service port numbers.
{
Custom—Allows you to select platform components to install and deploy on the current server.
After installation is complete, deploy IMC components.
To deploy all the IMC Platform subcomponents, select Typical. To deploy only the desired IMC Platform
subcomponents, select Custom.
To install IMC on a virtual machine, configure the VM access parameters on the VM Installation Check
dialog box, as shown in
1.
The VM Type defaults to VMware and cannot be changed.
2.
Enter the IP address of the VMware host in the Host IP field. The host must be ESXi. VMware
Workstation is not supported.
3.
Select the protocol type used to access the VMware host from the Access Protocol Type list. Options
are HTTP and HTTPS (default). To select a protocol type, contact the host administrator.
4.
Set the port number to access the host where the VMware is deployed in the Port Number field. The
default value is 80 for HTTP and 443 for HTTPS. To set the port number, contact the host
administrator.
5.
Set the username and password used to access the VMware host in the Username and Password
fields. The default username is root. The username has all rights to manage the VMware host.