Grass Valley 8985FS v.1.2.0 - Manual (Page 56)

56 8985FSP/FS/PRC — Instruction Manual
Configuration
Figure 30. Load Module Configuration.
3. This will bring up the Choose File screen shown in Figure 31 .
4. Select a file to load and then press Open to bring the file into the filename
field.
5. Press the Load button in the Load From... web page to load the file to the
module.
Note The parameters stored in this file will immediately be loaded to the module.
This could change the status of the output so be sure to be aware of the
changes or be off air before uploading a configuration file.
Figure 31. Choose File Screen