Grass Valley 8990ARC v.3.0 - Manual (Page 12)

12 8990ARC Instruction Manual
Power Up
Power Up
The various front LED indicators and configuration switches are illustrated
in
Figure 5 . Upon power-up, the green PWR LED should light and the
yellow CONF LED should illuminate for the duration of module initializa-
tion.
Operation Indicator LEDs
With factory default configuration and a valid input signal connected, the
green PWR LED, and one of the green signal standard LEDs (525 or 625)
should illuminate (refer to
Table 2 on page 13 to see the possible operating
indicator combinations).
Video input presence is indicated by the appropriate 525 or 625 LED (indi-
cating a 525-line or 625-line input signal has been detected). The appro-
priate Mode LED is on.
Figure 5. LEDs and Configuration Switches
8036_05r1
Mode 1 (yellow)
Mode 2 (yellow)
Mode 3 (yellow)
Mode 4 (yellow)
FAULT (red)
COMM (yellow)
CONF (yellow)
PWR (green)
525 (green)
625 (green)
16:9 (yellow)
4:3 (yellow) 16-position
Rotary switch
Momentary paddle switch