Grass Valley ADVC-HD50 - Manual (Page 10)

― 6 ―
3
ADVC-HD50 Connections
3-1 Connections and Preparations
Refer to the diagram below to connect your ADVC-HD50 to each device.
Connect a HDMI device.
*HDCP not supported. Connect a PC or an HDV device.
Bus power
If you connect the ADVC-HD50 unit to an IEEE1394 port of your PC with the
supplied IEEE1394 Firewire cable(6pin-6pin), it doesn't need the approved AC
adapter.
If the ADVC-HD50 unit is always connected to your system, it will automatically
be turned on or off, whenever you start up or shut down your PC.
Power to the ADVC-HD50 must be supplied through an approved AC adapter
(optional) if the ADVC-HD50 is connected to the PC or other devices with a
IEEE1394 Firewire cable(6pin-4pin).
& NOTE
ADVC-HD50 does not encode video/audio protected with HDCP into HDV.
& NOTE
Do not connect anything other than an approved AC adapter (optional).
