Grass Valley AMX-1881 - Manual (Page 13)

AMX-1881 HD/SD 8 AES Embedder
Guide to Installation and Operation
AMX-1881 Page 13 of 19
The advanced button shows the long ID of the device. The
Miranda Long ID is the address of this AMX-1881 in the
iControl network.
Click the remote system administration button to open
the “joining locators: AMX-1881” window, which lists
remote lookup services to which this AMX-1881 is
registered, and allows new ones to be added.
User presets
The AMX-1881 has memory registers which can hold up to
5 user-defined parameter settings
.
Select any one of the five presets using the pull-down list.
The name of the currently-selected User Preset is shown
on the name bar.
• Click Load to load the contents of the selected User
Preset into the AMX-1881. All parameter settings and
values will be replaced by the contents of the selected
User Preset.
• Click Save to store the current parameter settings and
values from the AMX-1881 into the selected User
Preset. The existing contents of the preset will be
overwritten.
Note that you can use GPI inputs 1 and 2 to select and
load Presets 1 and 2 if you have chosen the User Preset
mode in the GPI tab in the Metadata window.
Profiles
See Annex 3 on page 17 for details.