Grass Valley Apex v.2.0 - Manual (Page 48)

50 APEX — Installation and Service Manual
Section 2 — Planning Guide
Single AES Reference
Since there is only one AES reference in this example ( Figure 16 ), it must be
selected for use by all input and output boards. On systems with the
CX-34000 Control Crosspoint boards (all present systems). This selection is
made with DIP switches.
Details concerning DIP switch settings are found in Section 3-Installation of
this manual.
Figure 16. Single AES Reference Example
AES REF A
VID REF A
House AES reference A
Input and output
board(s) on
AES Ref A
1 Binary ID used for assigning
reference to input and output board
with XPT board DIP switches