Grass Valley 3-CCD CameraMan Rev.B User Manual

Page 6

Advertising
background image

Page 3

Take a look at the back of your Main Docking Station. The diagram below shows the various connections and configuration switches.

▼

▼

1

RS-485 IN and OUT JACKS - 4-position modular handset jacks used for RS-

485 communications between the camera system and other CameraMan

devices.

▼

▼

2

PVI COM JACK - 6-conductor RJ-11 jack used for communication with

Tracking Keypad in hard-wired mode.

▼

▼

3

IR TRANSMIT JACK - Reserved for future use.

▼

▼

4

S-VIDEO OUT JACK - Provides direct S-Video output through standard mini

DIN jack (cable is not provided).

▼

▼

5

COMPOSITE VIDEO OUT JACK - Provides direct composite video output

through standard BNC-type jack (cable not provided).

▼

▼

6

ANTENNA - RF receivers for the tracking power pack.

▼

▼

7

REMOTE DOCKING STATION PORT - Reserved for future use.

▼

▼

8

RF CHANNEL SELECT - Used to select which RF channel the Main Docking

Station will use to communicate with the Tracking Ring Package.

▼

▼

9

RS-232 PORT - Standard DB-9 (female) connector provides RS-232

communications capability for devices like PCs or other vendor control

systems.

▼

▼

10

AUXILIARY COMMUNICATIONS PORT A - Provides communications to

select CameraMan peripherals. Do not use unless otherwise specified.

▼

▼

11

AUXILIARY COMMUNICATIONS PORT B - Provides communications to

select CameraMan peripherals. Do not use unless otherwise specified.

▼

▼

12

AUDIO: BALANCED JACK - Standard XLR-type connector provides

balanced, audio output to connect to a standard mixer or similar audio

equipment.

▼

▼

13

AUDIO: UNBALANCED JACK - Standard RCA-type connector provides

unbalanced, mono audio output to connect to a standard mixer or similar

audio equipment.

▼

▼

14

AUDIO: LEVEL SWITCH - Used to configure the level of the audio

balanced (XLR) output- either LINE or MIC level, depending on the type of

audio system interfacing with the CameraMan system.

▼

▼

15

BASE UNIT PORT - 10’ multi-conductor, 37-pin D-sub connector provides

communication between the Main Docking Station and the Camera

System.

▼

▼

16

DC POWER - Power input for the Main Docking Station.

▼

▼

8

▼

▼

7

▼

▼

6

▼

▼

6

▼

▼

5

▼

▼

4

▼

▼

3

▼

▼

2

▼

▼

1

▼

▼

9

▼

▼

10

▼

▼

11

▼

▼

12

▼

▼

13

▼

▼

14

▼

▼

15

▼

▼

16

Advertising