Grass Valley 3000 PowerPlus - Manual (Page 15)

11
PowerPlus 3000
User Guide
Fig. 3-2: PowerPlus 3000 LED Indicators and Connectors
No. Description No. Description
PowerPlus 3000 LED Indicators
1 24 Volt DC "A":
24VDC is available on connector at
v Power In 4 Auxilliary +12 Volt Output:
12VDC is being supplied to 4-pin XLR
connector V
2 Power In:
Power is being received from the
HDX power supply
• Red - initial safety handshaking in
progress, full power not engaged.
• Green - safety handshaking
completed, full power being
received from HDX power supply.
5 24 Volt DC "B":
24VDC is available on connector X
3 Camera Out:
12VDC is being supplied to the
battery plate 6 Battery Plate:
Used to mount the PowerPlus to the
CopperHead Camera Unit
(Anton/Bauer or V-Mount)
PowerPlus 3000 Connectors
7 Heat Sink:
• LP- Low Profile Heat Sink rated for
100 Watts (shown)
• HP - High Profile Heat Sink rated
for 150 Watts (not shown)
11 Tactical Fiber Dongle:
Fixed tactical fiber cable connects to
the CopperHead Camera Unit.
PowerPlus 3000 LED Indicators PowerPlus 3000 Connectors