Grass Valley Digital Wireless Triax Camera System - Manual (Page 34)

34 User’s Guide - Digital Wireless System version 9
WCU Connectors (cont.)
(5) Reference input connectors
BNC connectors
This BNC connector accepts a 1Vpp composite reference* signal
to the camera for genlocking. (The second connector should be
terminated with 75 Ohm if the signal is not looped through.)
* must have H and V sync. signals
(7) CVBS output connector
BNC connector
This socket provides a 1Vpp CVBS output signal for monitoring
purposes.
(8) WCU SDI output connectors
BNC connectors
These three BNC connectors provide a 0.8Vpp SDI output video
signal according to SMPTE 259M.
(6) Triax connector for AMU 1 & 2
Triax connector
This socket is used to connect the triax cable (<400m of 8mm triax
cable) from the triax output of the AMU.
Receptacle types: Fischer, Tri-lock, ARD, Lemo 4, Lemo BBC,
Lemo 3.