Grass Valley RTic v.2.43 - Manual (Page 30)

RTic User Manual- document version: 2.43 - 30
12 The K2 Edge Object how to
Use this object to specify a K2 Edge playout system.
To define the system and connect:

Insert the System > K2 Edge object.
 Double-click to edit.
 Enter the playout server’s IP-address.
 Enter the IP-socket, the default port is 5000.
 Specify the playout Channel number. Channels are numbered starting from 0.
 You do not have to specify the number of layers, leave at the default.
 Click Connect to connect.
The status bar turns green.
 Click Save to save the connection, Cancel to discard.
 To link a System object, drag the System object on top of the other object and not vice versa.
Example. The system is connected.
To link a System object, drag the System object on top of the other object and not vice versa.