Configuring a dasdec-ii device, Configuring a dasdec-ii device -7 – Grass Valley iTX Emergency Alert Service v.2.3 User Manual
Page 12
Advertising
iTX Emergency Alert System User Manual
2-7
Configuration Instructions
Configuring a DASDEC-II device
The iTX Emergency Alert Service supports the DASDEC-II by Monroe Electronics.
Please consult the manufacturer’s web site for official documentation and installation
instructions (
http://www.digitalalertsystems.com
).
The following procedure guides you through the steps required to configure the DASDEC
device to feed EAS messages to the iTX Emergency Alerts Service.
1.
Open Internet Explorer and type the DASDEC device’s IP address in the address bar
(http://10.14.4.3) and hit return.
2.
Log into the DASDEC Server by entering a valid User Name and Password.
3.
Select the Setup tab, enable the Net Alerts radio button and select the EAS Net tab.
Advertising