Import media via the ftp endpoint, Configuring omneon video servers and ftp endpoints – Grass Valley iTX Delivery Manager v.2.6 User Manual
Page 55
49
Delivery Manager
Configuration and Setup Guide
Import media via the FTP endpoint
To import Media via the FTP endpoint from an FTP based storage on a Colossus/iTX 1.4
system
1 From Delivery Manager Config, open an existing configuration profile or create a new
one and add a new endpoint tab using the CoreDriver, as described in
of
Generic Steps for Adding a Core Endpoint
2 Click the browse button for the Cache Content Workflow field. The Select ‘Cache
Media’ Workflow... dialog appears.
3 Select the required workflow for moving media and assets to the iTX store. For
example
DefaultCacheMediaCore
.
4 In the Core Configuration section, entered the details of the location that can be
accessed via FTP.
5 Click Add New Endpoint to create an additional endpoint within the same
configuration profile.
6 For the Endpoint Driver, select FTPDriver.
7 In the FTP Server Configuration section, enter the details of a file store where the
Colossus/iTX 1.4 system places their media.
The FTP endpoint store name must match the location name used by the Colossus/iTX
1.4 system. For example, in the Colossus/iTX 1.4 system there is a location called FTP.
Media is deposited in an FTP folder on a server named
FTP_MEDIA
. The Core endpoint is
configured to look at a Colossus/iTX 1.4 database and has a location called “FTP”. The
FTP endpoint is configured to access the FTP server
FTP_MEDIA
.
8 Configure the Missing Materials Manager to search the Core endpoint. See
Missing Materials Manager for the Core Endpoint
on page 60 for more information.
Configuring Omneon Video Servers and FTP Endpoints
Note:
This is a special type of FTP endpoint. The filenames stored in the
Colossus/iTX 1.4 database do not match the names of the files on the
Omneon server.
To import media via the FTP endpoint from an Omneon video server
1 From Delivery Manager Config, open an existing configuration profile or create a new
one and add a new endpoint tab using the CoreDriver, as described in
of
Generic Steps for Adding a Core Endpoint
2 Click the browse button for the Cache Content Workflow field. The Select ‘Cache
Media’ Workflow... dialog appears.
3 Select the required workflow for moving media and assets to the iTX store. For
example
DefaultCacheMediaCore
.
4 In the Core Configuration section, enter the details of the Omneon location.
5 Click Add New Endpoint to create an additional endpoint within the same
configuration profile.
6 For the Endpoint Driver, select FTPDriver.