Grass Valley Vertigo XG Integration v.2.3 - Manual (Page 19)

Vertigo XG & iTX Integration User Guide 2-9
Configuration Procedures
4. Click Save and then Close.
A CTIVE Select the Active button to enable (green LED) or disable (grey LED) the
VertigoXG plugin.
A DDRESS Enter the IP address of the playout server on which Xplay is running.
P ORT 5006 is the port number on which iTX is to communicate with Xplay.
A UTOMATION D ELAY ( MS ) iTX uses this value to determine how much earlier than the scheduled time
Take and Clear commands are sent.
When E NABLE TS C OMMANDS is selected, an automation delay of at least
500ms is recommended.
OFF D ELAY ( FRAMES ) Specifies the number of frames prior to the end of the XG event that the Clear
command will be triggered, so as to offer the page’s Default Out animation a
chance to playout.
O UTPUT C HANNEL Currently not used.
E NABLE S LAVE D EVICE Enable this setting when a Master-Slave setup is used and the Master and
Slave each have their own instance of an XG.
E NABLE TS C OMMANDS When selected, the Take and Clear commands are sent to the XG as
determined by the Automation Delay setting with a timestamp indicating
when the command will execute. This approach compensates for small
delays in communication with the XG and ensures frame accuracy.