Grass Valley K2 Dyno S v.3.0 - Manual (Page 27)

K2 Dyno S Replay Controller 27 Installation & Service Manual
4 December 2012
Chapter
2
Dyno S Controller Installation
This section explains installation of the K2 Dyno S Replay Controller, which operates in
conjunction with a K2 system. Refer to the separate K2 documentation set for specific
installation information about the K2 Summit, K2 Solo, or K2 SAN.
Unpack and check Dyno S Controller contents
Find the following items in the packaging for the Dyno S Controller.
NOTE: Do not lose the Recovery Flash Drive. It contains the recovery disk image for
this specific K2 Dyno S system.
Item Description
K2 Dyno S Replay Controller
Power Cord
Recovery Flash Drive (stored on rear panel) which contains:
-Software and disk images.
-Dyno S Documentation
Keyboard and Mouse
DisplayPort to DVI Adapter (passive)
Licenses and Warranties