Start a new session on the k2 dyno controller – Grass Valley K2 Dyno Installation v.2.0 User Manual

Page 27

Advertising
background image

2. In Configuration Manager, click

Channel

and then select a channel tab to make settings.

•

On K2 Summit Production Client, typical settings are as follows:

•

Configure channels

C1

and

C2

as record channels. Make video and audio settings as

appropriate for your input.

•

Configure channels

C3

and

C4

as play channels. Make video and audio settings as

appropriate for your output.

•

On K2 Solo Media Server, typical settings are as follows:

•

Configure channels

C1

as a record channel. Make video and audio settings as appropriate

for your input.

•

Configure channels

C2

as a play channel. Make video and audio settings as appropriate

for your output.

•

If using ChannelFlex Suite features, configure a channel's

Channel Type

, selecting one of the

following:

•

3D/Video+Key Player

•

3D/Video+Key Recorder

•

Multi-Cam Recorder

•

Super Slo-Mo x2 Recorder

•

Super Slo-Mo x3 Recorder

Refer to the K2 AppCenter User Manual for detailed procedures.

Start a new session on the K2 Dyno Controller

Do this task on the following systems:

•

A K2 Dyno Controller that controls a stand-alone K2 system.

•

The first K2 Dyno Controller on a K2 SAN system of the group of controllers that share media
on the K2 SAN.

1. On the K2 Dyno Replay Controller, open

K2 Dyno

.

2. Touch

Add Server

and manually enter the K2 Summit/Solo name (not the IP address), or select

the K2 Summit/Solo controlled by the K2 Dyno Controller and

Connect

or

Reconnect

.

3. Select

New session

.

4. For a typical system, do the following:

a) Set C1 and C2 to Recorder.
b) Set C3 and C4 to Player.
c) Touch

Next

.

5. Touch

Start

.

Refer to K2 Dyno Controller User Manual and K2 Dyno Replay System Quick Start Guide for
operation instructions.

If you have multiple K2 Dyno Controllers on a K2 SAN, continue with the next task.

14June 2011

K2 Dyno Controller Installation Manual

27

Installing and configuring software

Advertising