Grass Valley K2 Dyno Installation v.1.6 - Manual (Page 18)

Cable K2 Dyno Controller
Make K2 Dyno Controller cable connections as illustrated.
100-240 V~
4A 50-60H z
RS-232
Power
cord
Keyboard
and mouse
VGA
monitor
Ethernet control connection
Optional: Ethernet media
(FTP) connection
The control connection between the K2 Summit Client and the K2 Dyno
Controller can be via direct connect cable or via an Ethernet switch. Control
connections must be on the same network (subnet).
18 K2 Dyno Controller Installation Manual 13 April 2010
Cabling systems