Sharpness and picture quality settings – Epson 1080 User Manual
Page 37
Making Detailed Adjustments
37
■ Brightness Control
This setting controls the light output from the projector. On high, the lamp uses 170 W
of power. On low, the lamp uses 135 W.
Sharpness and Picture Quality Settings
If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to
correct it.
■ Sharpness
Use this function to make lines and edges appear more distinct in the image. This setting
is stored separately for each image source and color mode setting. You can select
Standard
to adjust the sharpness of the entire image, or select
Advanced
to access the
following submenu:
Choose
Thin-Line Enhancement
to sharpen details such as hair and clothing. Choose
Thick-Line Enhancement
to sharpen large contours and backgrounds.
■ Progressive
The projector uses 3D DigiScan HD Circuitry Processing for video-sourced images. For
film-sourced images, the projector uses 3-2 pulldown detection and optimizes the image
accordingly.
Leave this setting on
Video
for most purposes. Set to
Film/Auto
when the input source is
a film, and you want to project an image closer to its original source.
Note: This setting applies only when viewing composite video, S-video, component video, or
480i or 575i RGB video (see page 63).
Image
Æ Brightness Control
Image
Æ Sharpness
Signal
Æ Progressive