Grass Valley Fibre Channel Switch - Manual (Page 16)

16 Fibre Channel Switch Installation Manual 29 January 2007
Welcome
2) Reset Network Config
3) Reset User Accounts to Default
4) Copy Log Files
5) Remove Switch Config
6) Remake Filesystem
7) Reset Switch
8) Update Boot Loader
Option:
6. Refer to the “Recovering a switch” section of the SANbox2 Fibre Channel Switch
Installer’s/User’s Manual for detailed explanations of the various choices. For
example, you might use item 2 to reset the switch’s network properties to the
factory default values, or item 3 restore the admin password to password
(password). Choose item 7 to reboot the switch with the new parameters.
7. Use option 7 to close the communication session, exit Force PROM mode, and
reboot the switch with the new configuration.