Elitegroup MANTIS PV-28SV55-(CN - Manual (Page 22)

22618-12-0707 Page 22
Available from Empire Comfort Systems, Inc.
The flex vent kit is a flexible vent hose that is 42” in length. The flex vent kit will be used when installing a Mantis into an existing
fireplace or any application that requires flexible pipe. The flex vent kit can be cut down, but can only be cut from one end. Do not allow
sags in flexible vent pipe.
Cement PVC Joints
Cut End
Cement PVC Joints
Once length is determined, install two (2) 10 x 1/2” screws into the adaptor assembly to secure the adaptor assembly to the flex hose.
Using PVC cement. Cement all PVC joints of the flex vent kit to the remaining PVC vent run.
PVVK-CFA FLEX VENT KIT