Grass Valley Kaleido-IP with Kaleido-X Cascade Manual - Manual (Page 13)

11
Kaleido-IP/Kaleido-X cascade
Step-by-Step Configuration
FULL SCREEN, etc.) only work in parts of the layout associated with the multiviewer that
is directly connected to the displays.
Workaround: Use the monitor wall menu.
• Router outputs are not cascaded.
• Working against the same cascade system in concurrent XEdit sessions is not
supported.
• EDID auto-detection is not supported. When configuring a cascade room, make sure
the Use detected monitor resolution check box is not selected for any of its displays.
Refer to “Enabling EDID Auto-Detection from the Monitor Wall“, or “Enabling EDID
Auto-Detection in XEdit“, in the Kaleido-X User’s Manual, for details.