Software, Or the – Grass Valley KAM-XM-SERIES v.1.4.1 User Manual
Page 69
KAM-XM-SERIES Instruction Manual
69
Configuration and Adjustments
Acquiring the Latest Software
To acquire the latest Kameleon software, connect to the Grass Valley Cus-
tomer Service FAQ database from the following URL:
http://gvg.custhelp.com
This will take you to the Grass Valley Customer Service FAQ data base. The
information provided here is the most up-to-date. You may also subscribe
to software updates through the FAQ site. This is recommended so that
when new versions of software are released, you are notified by email.
To download the latest Kameleon HD software for either the FTP or Net-
Config methods, do the following:
1.
Navigate to the FAQ site and click on the first FAQ, DOWNLOAD THE
LATEST SOFTWARE?
2.
Select the 2000 Series link.
3.
Select the link to the latest Kameleon module software.
4.
Follow the instructions to download the files to your PC.
If you cannot find the software you need, go directly to the Grass Valley
Customer FTP site at the following URL:
ftp://ftp.thomsongrassvalley.com/pub/modular
Software Updating With NetConfig
To use this method, your 2000NET module must be running version 3.2.2
or later and you must have the NetConfig Networking Application option
running on a networked PC on the same subnet as the frame with the
2000NET module. Seven files are required for updating software, six .fld
files and an .sw2 for the module being updated.
To use NetConfig for software updating, follow the steps below:
1.
Begin the upgrade procedure by moving the KAM-XM files you have
downloaded into your Temp directory into the correct NetConfig
directories (these steps apply to all versions of NetConfig).
2.
Copy all KAM-XM software download files from the C:\temp
directory into the main NetConfig directory on your PC. This is
normally in the default location in C:\Program Files\Grass Valley
Group\NetConfig.
If you have installed NetConfig in another location, find the location of
the NetConfig directory by right-clicking on the NetConfig shortcut.
Select
Properties
and note the location in the
Start In
field. Download the
package to the NetConfig directory.