Grass Valley NetConfig Network Configuration Application v.2.0.12 - Manual (Page 28)

NetConfig — Instruction Manual 28
Using NetConfig
The Inventory function gives the following information about each device:
• Name – device name assigned by the user.
• IP Address of the device (frame address if a module), and, if applicable,
Subnet Mask, Gateway, and EN2 IP data.
• Slot – if the device is a frame module, the frame slot number it is
installed in.
• Class– identifies the device as a frame, panel, or other (module).
• Type – gives a description of the device.
• Asset Tag number – the asset number of the device.
• Location – the user-assigned location of the device.
• Part # and Serial # (if supported by that device).;
• Hardware and Software Revisions.
• MAC address.
Figure 24. Inventory Function