Epson A794-D100 User Manual
Page 58
Chapter 6: Programming Information
A794 Owner’s Guide
March 1999
52
Select Sensors to Stop Printing
Selects the paper sensor used to detect when the paper is out. The printer finishes
printing the current line and feeds the paper before stopping.
ASCII
ESC c 4 n
Hexadecimal
1B 63 34 n
Decimal
27 99 52 n
Value of n
Sensor status
Sensor Status
Bit
Sensor
0
1
0
Receipt Paper Near-End
Disabled
Enabled
1
Receipt Paper Near-End
Disabled
Enabled
2-4
Undefined
6
Undefined
Bits 5 and 7 are not used.
Default
0
Enable or Disable Panel Button
Enables or disables the paper feed button by toggling the paper feed button on and off.
Only the lowest bit is used to toggle the paper feed button. If the last bit is 0, the paper
feed button is enabled. If the last bit is 1, the paper feed button is disabled.
ASCII
ESC c 5 n
Hexadecimal
1B 63 35 n
Decimal
27 99 53 n
Value of n
0 = Enable
1 = Disable
Default
0 (Enable)
Exceptions
Functions that require the panel button cannot be used when it has been disabled with
this command.