Defaults, Initial panel state, Dhcp – Grass Valley NV9608 v.1.0 User Manual
Page 69: Drawings, Technical details, Configuration page
NV9616 Control Panel • User’s Guide
59
6. Technical Details
Defaults
Defaults
Initial Panel State
Destination: the configured default.
Buttons: low-tally is 40% brightness by default and stays at its most recent setting.
Configuration Page
The initial NV9616 or NV9608 configuration has no buttons defined. The default panel options are:
Panel type:
X-Y/Multidestination.
Default mode:
Multi-destination.
Release mode:
Normal.
Default destination:
None.
Preset monitor:
None
Status monitor:
None
XY data routing:
Automatic.
MD data routing:
Automatic.
Default name set:
System names
Multi-dest device limit:
16
Use continuous scroll:
Enabled (check box checked)
All other options:
Disabled (check boxes clear).
DHCP
The panel is set up to respond to DHCP from the factory. It is possible to assign the panel a fixed IP
address using the Panel IP Configuration Utility.
Drawings
The drawings that follow identify features and provide overall and critical dimensions.