Grass Valley UniConfi NVISION Series v.2.1 - Manual (Page 86)

74
Connections Window
Connections Window
XY/Mono View
In the “X-Y/mono” view of the diagnostic crosspoint matrix, there are 8 columns:
• Mono (input) — the mono input port of the signal routed to the output in the same row.
• Phys (input) — the physical connector number of the signal routed to the output in the same
row
• Channel (input) — The values can be either 1 or 2.
• Mono (output) — the mono output port.
• Phys (output) — the physical connector number of the output.
• Channel (output) — The values can be either 1 or 2.
• LPR — the “lock, protect, release” status of the output. An L in the field indicates that the out-
put in that row is locked. A P indicates that the output is protected. A blank field means that
there is no lock or protect on that output.
• Status — additional status or error states.
Machine Control View
Machine control crosspoints are different from video and audio crosspoints. Machine control
routers are bi-directional and point-to-point. For every machine control take, there is an
matching take in the opposite direction.
Further, machine control ports on the diagonal are tristated (i.e., turned off ). This is a sample of
the ‘Connections’ window for the NV5256:
In the machine control view, there are 4 columns:
• Input — the input that is routed to the output in the same row
• Output — the list is ordered by output port