Grass Valley Visual Status Display v.2.0 - Manual (Page 15)

Visual Status Display — Instruction Manual 15
Section
3
Encore VSD Configuration
Overview
The Encore system will not recognize the VSD until the IP address of the
PC running the VSD application is registered.
Note If the PC has already been registered with the Encore system you will not
need to do this registration procedure.
The following procedure assumes an Encore OUI has already been
installed onto the PC and the necessary applications have been configured.
If this is not the case, refer to the Encore Release Notes and/or Encore Config-
uration Manual for specific instructions.