Grass Valley RS-422 Interface Board - Manual (Page 12)

Before You Start
12 RS-422 Interface Board Installation
Kit Contents
A list of kit contents is shown in Table 1.
Tools Required
Tools required, but not supplied, to install this kit are:
• A Torx tool with T10 and T15 tips.
• Standard DB9 male-to-male cable (for loop-back diagnostic test)
• Electrostatic discharge (ESD) grounding straps.
Table 1. RS-422 Interface board kit contents
Qty. Item
1 RS-422 Interface Board
1 Interface cable for 8-port RS-422 Connector Panel
Grass Valley Group part number 174-4198-XX
(Replaces existing interface cable.)
1 Windows NT Driver Diskette
“Driver for the RocketPort Series/Windows NT (i386)”
1 Installation manual
1 Warranty card