Grass Valley PRS 250 RAID Storage System - Manual (Page 22)

Chapter 2 Installation
2-4 RAID Instructions
d. .Loosen the securing nuts ➊ on the two mounting rails as shown in the following
illustration.
Attaching the rails
e. .If the front channel does not have threaded screw holes, attach clip nuts to the
front channel.
f. Align the bottom of the rail is aligned with the baseline mark on the cabinet’s
channel. Attach the mounting rails to the rack mount cabinet as shown (➋).
0226-7
1
2
2
2
2
1
Slide rails to correct
length and tighten nuts