Grass Valley Terrapin FTR-D6 - Manual (Page 15)

11
Terrapin FTR-D6
User Guide
The SDI BNC Connector labels
The SDI BNC Power Labels serve two functions. These are the labels for the connectors
directly below the labels on the BNC end panel of the Terrapin FTR-D6. The In and Out
labels also serve as indicators/end points for the LED signal path indicators.
The physical connectors are described on The Fiber I/O and Power panel on page 12.
Fig. 2-5: SDI BNC Power Labels
The LED Mode Indicators
The Terrapin FTR-D6 uses a two-color LED system to indicate the various operating modes
of the system. The Fiber input and output and the SDI input each have an endpoint LED
indicator. The six SDI outputs have a single indicator for all six connections.
The operation of the LED indicators is described beginning on The LED Mode Indicators on
page 11.
Fig. 2-6: LED Mode Indicators