Grass Valley Triton Plus Revision 3 - Manual (Page 9)

Triton Plus - Control Panels - User Manual 9
Connection Details
Connection Details
Available service connectors at the back panel of the Triton Plus Routers are
shown in
Figure 1 .
Note Figure 1 shows a 1 RU Triton Plus router. However, the connectors are iden-
tical to the 1 RU also on the 2 RU and 4 RU units. The only connectors that
differ are the applicable signal connectors.
Figure 1. Rear View of Triton Plus Control Panel
• SYNC: Not in use on control panels.
• LOOP: Not in use on control panels.
• NCB IN: Network Control Bus Input. The protocol of this bus is equal,
and compatible to the MIDI bus protocol.
• NCB OUT: Network Control Bus Output.
• ETHERNET: Not supported at this time.
• RS-232: RS-232 for external control protocols.
• POWER A: ±15VDC Power Input.
• POWER B: ±15VDC Power Input, redundant supply.
• CONFIGURATION: Configuration switches (8 pcs).