Grass Valley Turbo iDDR Rack-Mount Kit - Manual (Page 5)

July 21, 2005 Turbo iDDR Rack-Mount Instructions 5
Installing the rack-mount kit
Installing the rack-mount kit
Tools needed:
Screw drive with Torx tip T15, Phillips tip P2, and a 11/32" nut driver or wrench
Install both rack-mount brackets
Install both rack-mount rails
2 Align bracket
with the chassis
mounting holes
1 Remove standard
length screws
Install long screws
from rack-mount kit 3
Repeat these steps
on the remaining side 4
Install adapter to
chassis using
screws provided
Install rail to adapter
using nuts provided
1
2
Repeat these steps
on the remaining side 3