Polaris 2007 ATV Sawtooth - Manual (Page 79)

A
76
MAINTENANCE
Spark Plugs
Spark Plug Recommendaitons
Refer to the specifications section beginning on page 104 for spark plug
and gap specifications.
Plug Condition Torque Specification
New Spark Plug 9-11 ft. lbs. (12-15 Nm)
Previously Installed Spark Plug 17-20 ft. lbs. (23-27 Nm)
CAUTION
Using non-recommended spark plugs can result in serious engine
damage. Always use Polaris-recommended spark plugs.
Spark Plug Inspection
Spark plug condition is indicative of engine operation. The spark plug
firing end condition should be read after the engine has been warmed
up and the vehicle has been driven at higher speeds. Immediately
check the spark plug for correct color.
Spark Plug Removal and Replacement
WARNING
A hot exhaust system and engine can cause serious burns. Wear
protective gloves when removing a spark plug for inspection.
1. Remove the spark plug cap (A).
2. Using the special
wrench provided in the
tool pouch, rotate the
spark plug
counterclockwise to
remove.
3. Reverse the procedure
for spark plug installation.
Torque to specification.