Polaris 2016 INDIAN Chief Classic - Manual (Page 35)

33
Instruments, Features and Controls
Instrument Cluster (CHIEF/DARK HORSE)
Indicator Lamps
Lamp Indicates Condition
Chassis Fault The alert symbol illuminates if a chassis fault occurs.
Tire Pressure Monitoring
System (TPMS)
If equipped, the TPMS indicator illuminates if low tire pressure is detected. It will also illuminate along
with the Low Battery Voltage indicator when TPMS battery power is low, requiring service.
Neutral The transmission is in neutral.
High Beam The headlight switch is set to high beam. This indicator will flash if there is a problem with the low or
high beam light.
Turn Signal The turn signal indicator flashes when the left, right, or both turn signals (hazard) are active. If there is
a problem in the signal system, the lamps will flash at twice the normal rate.
Check Engine If this lamp illuminates while the engine is running, see your dealer promptly. The light will remain on if
the tilt sensor shuts down the engine. If abnormal sensor or engine operation is detected the light will
remain on as long as the fault condition exists. Retrieve the error codes for diagnosis. See page 37.
Anti-Lock Brakes Not
Activated
The indicator remains on until the anti-lock system activates, which occurs when vehicle speed
exceeds 6 MPH (10 km/h). When the lamp is illuminated, the anti-lock brakes will not activate, but the
conventional brake system will continue to operate normally.
Vehicle
Speed
When standard mode is selected, speed displays in miles per hour.
When metric mode is selected, speed displays in kilometers per hour.