Elo TouchSystems 1200L - Manual (Page 21)

20
Installing the Driver Software
Elo TouchSystems provides driver software that allows your
touchmonitor to work with your computer. Drivers are located
on the enclosed CD-ROM for the following operating systems:
Windows 2000
Windows 98
Windows 95
Windows NT 4.0
Windows 3.x
MS-DOS 2.x or later
Additional drivers and driver information for other operating sys-
tems (including OS/2, Macintosh and Linux) are available on
the Elo TouchSystems web site at www.elotouch.com.
Your Elo touchmonitor is plug-and-play compliant. Information
on the video capabilities of your touchmonitor is sent to your
video display adapter when Windows starts. If Windows de-
tects your touchmonitor, follow the instructions on the screen
to install a generic plug-and-play monitor.
Installing the Touch Driver for Windows 2000,
95/98 and NT 4.0
Refer to the appropriate following section for driver installation
instructions.
Note: For Windows 2000 and NT 4.0 you must have administrator
access rights to install the driver.
1.Insert the Elo CD-ROM in your computer’s CD-ROM drive.
If the AutoStart feature for your CD-ROM drive is active, the
system automatically detects the CD and starts the setup pro-
gram.