Echo CS-8000 TYPE1-E - Manual (Page 6)

4 CS-8000 TYPE1=E
SYMBOL FORM
DECALS
Locate this safety decal on your unit. The complete
unit illustration found in the “NOMENCLATURE OF
PARTS” section will help you locate them.
Make sure the decal is legible and that you
understand and follow the instructions on it. If a
decal cannot be read, a new one can be ordered
from your ECHO dealer.
Part Number 890191-30131
Part Number X524-001672
Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application
WARNING!!
Read and follow all safety
precaution in the instruction
manual Manual oiler
Wear eyes, ears and head
protection Automatic oiler adjustment
STOP
Emergency stop
L
Carburetor adjustment
- Low speed mixture
Choke control “Cold Start”
position (choke closed)
H
Carburetor adjustment
- High speed mixture
Oil and gasoline mixture
T
Carburetor adjustment
- Idle speed
Chain oil fill
REPLACEMENT BAR AND CHAIN
GUIDE BAR* CHAIN*
PART NO. TYPE LINKS
20” 20D0PS3870 OREGON 72LPX, 72LGX 70
24” 24D0PS3881 OREGON 72LPX, 72LGX 81
27” 27D0PS3893 OREGON 72LPX, 72LGX 93
32” 32D0PS3805 OREGON 72LPX, 72LGX 105
36” 36D0PS3816 OREGON 72LPX, 72LGX 116
*Or equivalent
Note: There may be other replacement
components for achieving kickback
protection. For details, please refer to
the chain and bar combination sheet
shown in the instruction manual.
TO AVOID KICKBACK
1. Hold the chain saw firmly with both
hands.
2. Don’t let the nose of the guide bar
contact any obstruction.
3. Tip contact may suddenly move the
guide bar upward and backward,
which may cause serious injury.
WARNING!!
This chain saw is capable of severe kickback
that could result in serious injury to the user.
Do not operate this chain saw unless you
have extraordinary cutting needs and
experience and specialized training for
dealing with kickback. ECHO chain saw with
significantly reduced kickback potential
are available.
WARNING!! Read and follow all safety
precaution in the instruction manual.
Failure to follow instructions could
result in serious personal injury.
CS-8000
WARNING
Chain brake must be unlocked before removing or installing
clutch cover. Improper cover installation can result in serious
injury and cause severe damage to saw.
El freno de la cadena debe ser desbloqueado antes de remover o de instalar
la cubierta del embrague. La instalación incorrecta de la cubierta
puede dar lugar a lesión seria y causar daño severo a la sierra.
Part Number 890161-31733
Part Number 890191-31731
Part Number X505-002041