Epson PICTUREMATE PM 225 - Manual (Page 46)

44
Printing is too slow.
● It takes a few moments for PictureMate to process
your images before printing them.
● If PictureMate is in a hot or sunny location, move it
to a cooler place and try printing again.
For faster printing, try these tips:
● Don’t print more than 40 pictures at a time.
● Photos with borders print faster than borderless
photos.
● Turn off special features such as color effects and
red-eye reduction.
Software Installation Problems
● Follow the instructions beginning on page 23 to
install your software. Don’t connect PictureMate to
your computer until you are instructed to.
● Close other programs, including screen savers and
virus protection software, and try installing again.
● Make sure your system meets the requirements
listed in your online User’s Guide.
● To print over a network, see the online User’s
Guide
for instructions on setting up printing.
Print Quality Problems
You see banding (light lines) in your prints.
● The print head may need cleaning. See page 38.
● Be sure to print with the glossy or whiter side of
the paper face up.
● The Print Pack may need replacing. See page 30.
● The print head may need aligning. See page 40.
Your print is grainy.
The print head may need aligning. See page 40.
Your print is blurry or smeared.
● Use PictureMate photo paper to ensure proper
saturation, absorption of ink, and quality.
● Be sure to print with the glossy or whiter side of
the paper face up.
● The print head may need cleaning. See page 38.
● The print head may need aligning. See page 40.