Epson 386/25 User Manual

Page 219

Advertising
background image

2.

Remove the retaining screw securing the hard disk drive

mounting plate to the computer and set it aside.

3.

Tilt the hard disk drive slightly to the right, away from the

subassembly, and lift it out of the vertical mounting area.

Turn it over and set it on top of the subassembly with the

gray mounting plate facing up. Since the drive is attached to

its cables, make sure you do not try to move it too far away

from the subassembly as you turn it.

Installing

and Removing Disk Drives

B-25

Advertising