Polaris 2014 Ranger EV - Manual (Page 32)

30
FEATURES AND CONTROLS
Main Power Connector
NOTICE: Damage to electrical connections and components will occur if they are unplugged before
the main power connector is disconnected. Always disconnect the main power connector
before servicing or unplugging any electrical components.
When disconnected, the main power
connector disconnects the battery pack
from all electrical components, with the
exception of the contactor. After servicing
the vehicle, the main power connector
should be the last connection to be made.
The main power connector is located
under the seat on the driver’s side of the
controller tray, adjacent to the main line
contactor. To disconnect, unplug the
connector.
To disconnect the battery pack from the
vehicle completely, disconnect the main
power connector, then remove the B+ wire
from the battery terminal.
WARNING! Insulate any tools used within the
battery area to prevent sparks or battery
explosion caused by shorting the battery
terminals or wiring. Remove the batteries, or
cover the exposed terminals with an insulating
material.
Trailer Hitch Bracket
This vehicle is equipped with a receiver
hitch bracket for a trailer hitch. Trailer
towing equipment is not supplied with this
vehicle.
To avoid injury and property damage,
always heed the warnings and towing
capacities outlined on pages 39-40.
Battery Installation
and Wire Lead
Connection
to contactor +
Front of vehicle
to controller -
Main Power Connector
B+ wire