Polaris 2016 Ranger ETX - Manual (Page 38)

36
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it's
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 25, 78
Brake fluid Ensure proper level 78
Park gear Ensure vehicle does not roll when in PARK. Ensure
PARK light illuminates.
-
Front suspension Inspect, lubricate if necessary 63
Rear suspension Inspect, lubricate if necessary 63
Steering Ensure free operation 79
Tires Inspect condition and pressure 80
Wheels/fasteners Inspect, ensure fastener tightness 80
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 26, 64
Coolant level Ensure proper level 72
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 25
Indicator lights/switches Ensure operation -
Air filter, pre-filter Inspect, clean 76
Headlamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
82
Brake light/tail lamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
83
Seat Belts Check length of belt for damage, check latches for
proper operation
27
Cab Nets Check for wear or damage, ensure proper installation 28