Polaris 2013 BRUTUS Accessory Snow Blade - Manual (Page 19)

18
OPERATION
Installation
Installing The Snow Blade
10. Install the pin (Item 6) and retainer pin (Item 7) (both sides).
11. Connect the hoses to the hydraulic quick couplers. (See page
19.
Leveling The Snow Blade
The snow blade should be leveled before every use. This will
position the snow blade parallel to the ground.
1. The tilt cylinder (Item 1) is used to adjust the front to back
level of the attachment.
2. Using the tilt function of the utility vehicle, level the snow
blade.
3. Once the attachment is leveled - engage the tilt lock. See
page 20.
Tip:
The snow blade is level (parallel to the ground) when rotating the
blade to the left and right and the blade tips remain level to the
ground. See Page 20.
Tip:
Once the attachment is leveled, the tilt function of the utility vehicle
can be locked so it does not need to be readjusted. (See the
BRUTUS Owner’s Manual for additional information).
7
6
1