Euro-Pro INTELLI SEW 9136C - Manual (Page 57)

55
03
Attention:
The selected pattern will be cleared from the memory module
after closing the machine if you do not press the "
" button
again when you have completed your selection.
5. Press the " " button to leave the memory mode and return
to the Direct mode.
Direct
Adding patterns or letters
While in the memory mode, press the " " button or the
" " button until the stitch number you have selected is
displayed, then add the new stitch or change the stitch length,
width, Auto-stop or mirror, if desire.
.......
.......
If you wish to delete a certain stitch within in the memory
mode, use the "
" button or " " button until the actual
stitch number is displayed.
Press the "
" button to delete the selected pattern and the
next pattern in the back will move forward.
Clearing patterns or letters
Patterns MEM
MEMORY
4. Use the arrow " " or " " button to check what you have
programmed.
Patterns MEM