Photo reference for 300 series – Ergotron 870-03-005 User Manual
Page 13
Advertising
870-03-005 rev. 05/30/03
• ARMS Orderguide • 13
Photo Reference for 300 Series
A 300 Series Arm with two 9" Extensions is mounted to a Command
Post. This configuration can extend the keypad out over 30 inches.
A 300 Series Arm with one 9" Extension attached to Wall
Mount Plate.
A 300 Series Vertical Mount Arm clamped to a 2" round pole.
A 300 Series Arm with 9" Extension is clamped to a worksurface.
Rear view of a 300 Series Arm. Note the cable routing.
The top view of a cubicle where a 300 Series Arm with two 9"
Extensions brings the monitor to point of use.
Advertising