ShoreLand'r SL60TAL V.1 - Manual (Page 14)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003354
REV C 4/28/06 Page 14
Detail M
Front Bunk Assembly
Mount the front bunk support weldments to the pivot weldments by placing them in the channel of the pivot
weldments and attaching with 1/2” X 4-1/2” stainless steel hex bolts and 1/2” stainless steel lock nuts. See De-
tail M. Place the bunk assembly over the support weldment, align the holes of the bunk brackets with the holes
in the support weldment and secure using 1/2” X 1-1/2” stainless steel hex bolts and 1/2” stainless steel lock
nuts. Tighten but do not over tighten because the bunks must rotate to conform to the boat bottom.